Innokin Coolfire Z80 NEX Kit Review Featured Image

Innokin Coolfire Z80 NEX Review | Details both the Zenith M and Zenith NEX Tanks

Richard WinterMods 8 Comments


Innokin Coolfire Z80 NEX with the Zenith M Tank

Welcome to our in-depth review on Innokin’s newest edition to their Coolfire range of vape products… the Coolfire Z80 NEX.

The original Coolfire Z80 has been around for a while now as we reviewed this back in 2021 when it was released with the Zenith II tank (see review link below). At that time the Coolfire Z80 included the Fourier FO technology and Coil Refresh options which have now been omitted on the Coolfire Z80 NEX in order to keep it simpler and more user friendly.

Coolfire Z80 with the Zenith II Tank Review

The Coolfire Z80 NEX, while maintaining the style/shape of the original, now has a face-lift with different layout controls, a modified (simpler) menu structure, a manual lock switch and an increased charging capacity. Paired with the Coolfire Z80 NEX is a new Zenith tank that comes with the upgraded and enhanced Z coils.

Innokin Zenith M Tank
Zenith M Tank
Innokin Zenith NEX Tank
Zenith NEX Tank

Before we jump into our review on the Coolfire Z80 NEX, it’s important to point out the Coolfire Z80 NEX kit comes with two different tank options:

Comparison of the airflow design between the Zenith NEX and Zenith M tanks
  • Coolfire Z80 NEX with the new Zenith NEX 5ml Tank
  • Coolfire Z80 NEX with the Zenith M 2ml Tank
Innokin Coolfire Z80 NEX Kit with the Zenith M Tank
Coolfire Z80 With Zenith M Tank
Innokin Coolfire Z80 NEX Kit with the Zenith NEX Tank
Coolfire Z80 With Zenith NEX Tank

For regions that aren’t subjected to the TPD restrictions, the kit includes the new Zenith NEX 5ml tank which features a TopSync system for seamless top filling and airflow control. This Zenith NEX tank is only available with a 5ml e-liquid capacity so TPD regions that are limited to 2ml e-liquid capacity tanks come with the Zenith M tank.

Innokin Zenith Minimal Tank
Innokin Zenith Minimal Tank
Innokin Zenith M Tank
Innokin Zenith M Tank

To make things slightly more interesting, the Zenith M 2ml tank is not to be confused with the Zenith Minimal 2ml tank that originally came with the Innokin EZ Tube kit which we reviewed back in 2023. This Zenith Minimal tank has since been discontinued and the EZ Tube kit is now supplied with the Zenith M tank. However when comparing the two different tanks it’s very difficult to see any difference between the two.

Innokin's Z coil range

Hopefully I’ve not lost you but fear not, all of the tanks I mentioned above are compatible with the full range of Innokin Z Coils.

Innokin Coolfire Z80 NEX mod and Zenith M Tank

The version of Coolfire Z80 NEX kit we received to review included the Zenith M tank so primarily our review will cover that variant. However, to bring you a comprehensive review of the Coolfire Z80 NEX we obtained the Zenith NEX tank and have included details of this tank within this review.

Innokin Coolfire Z80 NEX with the Zenith NEX tank attached

As with the majority of my reviews I will give a quick overview on the main features of the Innokin Coolfire Z80 NEX kit and then proceed with the full in-depth review.

Overview of the Coolfire Z80 NEX Kit

Coolfire Z80 NEX mod showing top view of the 510 plate
Coolfire Z80 NEX mod showing the bottom battery door

The Innokin Coolfire Z80 NEX resembles the styling and form factor of the earlier Coolfire Z80 so it’s still relatively compact, lightweight and powered by a bottom entry single external 18650 battery. It’s an adjustable variable wattage mod (side located + and – control button) with push button firing up to a maximum of 80W with a threaded 510 connector plate to attach the tank that comes included in the kit.

Front view of the Coolfire Z80 NEX showing the fire button, manual lock switch, USB charging port and TFT display
Side view of the Coolfire Z80 NEX showing the +/- rocker button
Back view of the Coolfire Z80 NEX

Incorporated into the front of the mod is a Type-C USB 5V/2A fast charging port, a 0.96 inch TFT display screen, circular fire button and a manual lock switch. The frame is manufactured out of Zinc Alloy with the back and just over half of each side following the familiar wrap-around leather hide we saw on the original Coolfire Z80 and comes in 6 different colors.

Innokin Zenith M Tank Vs Innokin Zenith NEX Tank
Innokin Zenith M Tank Vs Innokin Zenith NEX Tank

As we highlighted earlier, supplied with the Coolfire Z80 NEX kit will be either the new Zenith NEX 5ml tank or the Zenith M 2ml tank. Both tanks accept the complete range of Z coils which cater for Mouth-To-Lung (MTL) and Restricted Direct-To-Lung (RDL) vaping styles and have 510 drip tips. Both are topfill and variable airflow control but the method and position of these are different between the two tanks.

Innokin Zenith M tank with quarter turn top fill cap and bottom variable airflow control

The Zenith M tank is a quarter turn removable top cap with the fill port visible once the top cap is removed and has bottom adjustable single slot airflow control. It has an e-liquid capacity of 2ml (TPD) or 4ml (standard) and comes in 4 different colors.

Innokin Zenith NEX tank with rotating top cap that includes the e-liquid filling port and airflow control

The new Zenith NEX tank has top airflow and top filling which are both integrated into the same rotating top ring, has an e-liquid capacity of 5ml and comes in 3 different colors.

I would like to thank Alisa at Innokin for sending us the Coolfire Z80 NEX Kit that included the Zenith M Tank and a separate Zenith NEX tank. As always this review is completely unbiased and is our honest opinions of my findings on this supplied kit. If you click on any of the buy buttons, we may receive a small affiliate commission but at no extra cost to you.

Innokin Coolfire Z80 NEX Kit Review

Contents

Features and Specifications

Coolfire Z80 NEX Mod

  • Construction: Zinc Alloy and Leather
  • Dimensions: 84.5mm (H) x 27.5mm (W) x 39.5mm (D)
  • Weight: 95.2 grams (excluding battery)
  • Input Voltage: 3.2V – 4.2V
  • Charging: Type-C USB 5V/2A
  • Charging Time: Approximately 1 hour
  • Resistance Range: 0.1 – 3.5 ohms
  • Output Wattage: 6W-80W
  • Output Mode: Variable Wattage
  • Battery Specification: External single 18650
  • Display: 0.96 inch TFT Screen
  • Firing: Push Button
  • Connection Type: Threaded 510
  • Manual Lock/Unlock Switch
  • Tank compatibility: 27mm max before overhang
  • Screen Timeout: Adjustable between 5-180 seconds
  • Cut-Off Time: Adjustable between 3-18 seconds
  • 6 Colors available
  • 6 Safety features

Zenith M Tank

  • Construction: Stainless Steel/Pyrex Glass
  • Dimensions: 50.15mm (L) x 24mm (D) (including 510 pin and drip tip
    • 33.5mm high excluding 510 pin and 510 drip tip
  • Weight: 46.6 grams (including coil)
  • E-Liquid Capacity: 2ml (EU version), 4ml Standard
  • Coils: Innokin Z-Coil Plug and Play Range
  • Filling Method: Quarter Turn Top Fill
  • Drip Tip: 510 Ultem and 510 Delrin
  • Thread: 510 Connector
  • Airflow: Bottom Single Slot Variable

Zenith NEX Tank

  • Construction: Zinc Alloy/Pyrex Glass
  • Dimensions: 54.8mm (L) x 26mm (D) (including 510 pin and drip tip
    • 40.2mm high excluding 510 pin and 510 drip tip
  • Weight: 62.5 grams (including coil)
  • E-Liquid Capacity: 5ml
  • Coils: Innokin Z-Coil Plug and Play Range
  • Filling Method: Rotating Top Fill
  • Drip Tip: 510 Narrow and Wider Bore
  • Thread: 510 Connector
  • Airflow: Top Single Slot Variable

The combined height of the Coolfire Z80 NEX with the Zenith M tank attached is 130.5mm or when the Zenith NEX tank is attached it’s 134.8mm.

What’s in the Box?


Innokin Coolfire Z80 NEX Kit What's In The Box
  • Innokin Coolfire Z80 NEX Mod
  • Zenith M Tank (2ml) or Zenith NEX Tank (5ml) Note
  • Innokin Z Coil 0.8 ohm (pre-installed)
  • Innokin Z Coil 0.3 ohm
  • Spare Replacement Glass
  • Spare RDL Mouth Piece
  • Spare O-Ring Set
  • Type-C USB Charging Cable
  • Quick Start Guide
  • Warning Booklet

Note: The Coolfire Z80 NEX kit we received included the Zenith M tank so our photos show that kit variant. For kits purchased outside the EU the kit will include the larger Zenith NEX tank.

Coolfire Z80 NEX Packaging

Innokin Coolfire Z80 NEX Packaging

The packaging consists of a white rigid cardboard box that slides out from an outer colored sleeve which details the product content information. Once the outer sleeve is removed, lift off the lid of the box that has the words “INNOKIN” printed on it.

Coolfire Z80 NEX mod and Zenith M tank secured in the foam insert
Insert removed showing the two cardboard packets that house the spares

Once the lid is removed, the Coolfire Z80 NEX mod and the Zenith M or Zenith NEX tank that’s pre-fitted with the 0.8 ohm Z coil sit separately within a molded foam insert. Remove both the Coolfire Z80 NEX mod and Zenith tank and take out the foam insert by pulling the clear tag on the top edge of the foam insert.

Coolfire Z80 NEX mod, Zenith M tank and all of the kit contents

When the foam insert is removed there are two additional cardboard packages; the smaller of the two houses the spare glass and the larger of the packages is a wallet that contains the spare 0.3 ohm Z coil, additional RDL mouth piece, spare O-Ring pack, Type-C charging cable, warning + safety booklet together with a user manual.

Front view of the Coolfire Z80 NEX Kit packaging

On the front of the outer sleeve is the company name “INNOKIN”, the brand and model type “Coolfire Z80 NEX” and a photo sticker of the Coolfire Z80 NEX with the relevant Zenith tank attached in the color of the included device. The lower section of the front sleeve has the nicotine warning message with Innokin’s usual message of “The following warning applies when the product is used with nicotine-containing e-liquids”.

Back view of the Coolfire Z80 NEX Kit packaging

The reverse side of the outer sleeve details the “Brand and Model type”, “Package Contents”, “Manufacturer’s Details”, “CE/Kite mark” logo’s, the relevant safety warnings, a “Scratch Me” authentication label, a bar code sticker and the color of the included device.

Left Side view of the Coolfire Z80 NEX Kit packaging

On the left side of the outer sleeve are 4 different icons; “Full Z Coils Compatibility”, “6-80W Adjustable Power”, “0.96 inch TFT Screen” and “Manual Lock Switch”.

Right Side view of the Coolfire Z80 NEX Kit packaging

The right side of the outer sleeve has “INNOKIN”, “Platform Series” and “Designed By P.Busardo Vapingreek” together with two signatures.

Purple and Gunmetal Z80 NEX kits we received to review

Overall size and dimensions of the packaging are 175mm high x 80mm wide x 54mm deep. As you can see from the photos we received the Gunmetal and Purple colors of the Coolfire Z80 NEX with a Gunmetal and Stainless Steel Zenith M tank for the purpose of our review.

Preparing to Use the Coolfire Z80 NEX


Clear film being removed from the TFT display on the Coolfire Z80 NEX

Once you remove the Coolfire Z80 NEX and Zenith tank from the inner foam insert, remove the transparent film protection sticker from the 0.96 inch TFT display screen.

Inserting an 18650 battery into the Coolfire Z80 NEX

Unscrew the battery door at the base of the Coolfire Z80 NEX, insert a fully charged 18650 battery (positive end towards the top of the mod) and re-secure the battery door.

Base unscrewed and the Z coil being removed from the Coolfire Z80 NEX

Unscrew the base of the Zenith tank, remove (pull out) the pre-fitted 0.8 ohm Z coil and prime the coil by dripping a few drops of e-liquid into each of the Z coil wicking ports and down into the top of the coil.

Z coil fitted into the base of the Zenith M tank ensuring the flat tags align

Re-insert the coil into the Zenith tank ensuring the flat sides of the coil base plate line up with the two raised flat internal sides so the coil can be fully pushed in.

Note: Priming the coil is only needed when you first use a new coil.

Quarter turn top cap removed from the Zenith M tank revieling the e-liquid filling port

Refit and tighten the base of the Zenith tank. Remove the quarter turn top cap on the Zenith M tank, or rotate the airflow ring on the Zenith NEX tank to gain access to the filling port. Fill the tank with e-liquid and refit the top cap/close the filling port.

I recommend not vaping after the first fill but to leave it stand for 10-15 minutes for the e-liquid to saturate the wicks/coil. Screw the Zenith tank to the Coolfire Z80 NEX mod making sure NOT to over-tighten the tank so you don’t damage the thread.

Coolfire Z80 NEX in the "locked" position
Closeup view of the TFT display showing the locked symbol

Switch the Coolfire Z80 NEX on by pressing the fire button 3 times in quick succession. If when trying to switch the device on, the TFT display shows a red locked padlock icon, move the slider on the front casing to the right position to unlock the device. Press the fire button again 3 times to turn it on.

Innokin Zenith M tank with the bottom airflow open

Turn the airflow ring on the Zenith tank to the open position and set the wattage to its lowest value (6W). Take a few draws then gradually increase the wattage taking further draws at each stage until you start to detect flavor and vapor as you draw on the mouthpiece. Continue adjusting your wattage until you reach your desired power setting and adjust the airflow if you want to loosen/tighten the draw.

Note: The Coolfire Z80 NEX doesn’t have smart coil detect and won’t limit the maximum wattage that can be applied to any particular coil. We’ve added a quick list below to show the maximum wattage that should NOT be exceeded for each resistance coil that’s included in the kit:

  • 0.3 ohm Z Coil = 40W Max
  • 0.8 ohm Z Coil = 18W Max

We have written a guide on How to Prolong the Life of your Coil which you may find worth reading.

We’ve covered how to Charge, Fill and Adjust your Coolfire Z80 NEX vape kit in the relevant sections of this review. You can click on these hyperlinks if you want to go direct to those sections.

Innokin Coolfire Z80 NEX Mod Design and Appearance


Leather wrap hide on the Coolfire Z80 NEX

The Innokin Coolfire Z80 NEX is a Variable Wattage (6W-80W) mod and is made out of Zinc Alloy with a leather wrap-around design around the battery housing. The leather hide feels quite thick and is slightly textured to aid grip.

Right side view of the Coolfire Z80 NEX
Front side view of the Coolfire Z80 NEX
Left side view of the Coolfire Z80 NEX

Overall dimensions of the Coolfire Z80 NEX mod are approximately 84.5mm high (excluding the tank), 27.5mm wide and 39.5mm deep with the weight of the mod including the battery being 140 grams.

Coolfire Z80 NEX is powered by an external 18650 battery

It’s powered by a single external 18650 battery which is accessed via the threaded bottom battery cap. Opening the battery cap is carried out by swinging out the flush mounted battery cap lever and unscrewing anti-clockwise. There’s also an indent in the center of the battery cap to accept a small coin or screwdriver if you wish to remove the battery cap this way.

Bottom battery cap door is removed showing the entry for the 18650 battery on the Coolfire Z80 NEX

There are also 4 small battery venting holes in the battery cap to safeguard against any possible battery venting issues. Nice to see Innokin have included these as some mods we’ve reviewed in the past don’t appear to have any venting holes.

Red "positive" + mark in the battery chamber in the Coolfire Z80 NEX

Orientation of the battery is clearly marked on the inside of the mod housing with the polarity indicator being a red cross (+). This indicates the battery is to be inserted positive end first into the mod but note there is no negative (-) indicator on the battery cap.

510 plate and gold positive sprung loaded center pin on the Coolfire Z80 NEX

The threaded 510 connector plate that includes the circular gold plated spring loaded 510 pin is centrally located on the top of the mod but slightly set back from the front of the device. This 510 connector is very slightly raised from the main body to protect the attached tank from scratching the surface of the mod. The width of the top surface on the Coolfire Z80 NEX is 27mm so tanks over this diameter will overhang.

Coolfire Z80 NEX with the TFT display illuminated

Control is achieved by the onboard chipset and the User Interface (UI) is a 0.96 inch TFT display. It’s located on the front of the Coolfire Z80 NEX in-between the circular fire button and the rectangular lock/unlock switch which sit within a black opaque finger plate. The + and – long rectangular shaped control rocker button that adjusts the wattage and access the menu settings is positioned on the right hand side of the Coolfire Z80 NEX mod in the Zinc Alloy frame.

Close up view of the 0.96 inch TFT display on the Coolfire Z80 NEX

The 0.96 inch TFT screen is clear and crisp and shows the numerical wattage value, a color changing battery status icon, lock indication, coil resistance, puff counter, vape time reading, voltage that’s applied to the coil and a visual indication of a cycling spectrum while the fire button is pressed.

Timeout menu set to 5 seconds on the Coolfire Z80 NEX
Timeout menu on the Coolfire Z80 NEX set to 180 seconds

Although the screen is not adjustable in terms of color or brightness, the white color used on the menu screen is good and the display is bright enough to be viewed in most lights. The length of time the display screen remains visible after the fire button is released can be adjusted in the TIMEOUT menu setting between 5 and 180 seconds.

Coolfire Z80 NEX mod with the Zenith M tank attached

Firing the mod is carried out via a circular 11mm diameter button on the front finger plate above the TFT display and below the display is a 7mm by 3.5mm rectangular lock/unlock switch. Wattage adjustment is carried out using the +/- rocker button on the side of the Coolfire Z80 NEX. The response and feel of the buttons are very positive with no button rattle.

Cutoff menu on the Coolfire Z80 NEX set to 3 seconds
Cut off menu on the Coolfire Z80 NEX set to 18 seconds

Adjusting the duration of the vape time cutoff is carried out in the CUTOFF menu settings and can be altered between 3 and 18 seconds.

Charging the Coolfire Z80 NEX mod is via the USB type-C charging port underneath the lock/unlock switch

Charging the Coolfire Z80 NEX can be carried out in one of two ways, either via the front located bottom edge Type-C USB port, specified as 5V/2A, or by removing the 18650 battery and charging the battery in an external battery charger.

INNOKIN branded into the zinc alloy frame on the Coolfire Z80 NEX
Z80 NEX embossed into the leather hide on the back of the Coolfire Z80 NEX

Innokin’s branding is kept to a minimum, with their name “INNOKIN” stamped into the colored Zinc Alloy plate that secures the leather wraparound hide on the left side of the Coolfire Z80 NEX and “Z80 NEX” embossed on the back spine of the leather hide.

Accessing the menu structure is achieved by pressing the fire button and the – rocker button together. More detail on the menu structure is described later on in the Functionality section.

With regards to safety features, the onboard control chip provides the following prompts such as:

  • 3-18 seconds timeout (vape cut-off)
  • Low battery voltage (3.3V)
  • No coil/atomizer detected
  • High temperature warning protection
  • Short circuit protection
  • Low resistance protection

The Innokin Coolfire Z80 NEX is similar to the original Coolfire Z80 but with a simpler menu structure, a manual lock/unlock switch, and different control buttons. It still feels very solid, robust and extremely well built, is pretty small, lightweight and feels very comfortable to hold.

6 different colors in the Coolfire Z80 NEX range

Available in 6 different colors, the Zinc Alloy frame and the leather hide are color coordinated. These colors are:

  • Purple
  • Gradient Blue
  • Gunmetal
  • Silver
  • Black
  • Turquoise.

The only exception to this is the Gunmetal Z80 NEX has a Tan (brown) leather hide.

Innokin Zenith M Tank Design and Appearance


Innokin Zenith M tank (2ml)

Constructed out of stainless steel and Pyrex glass, the Zenith M is 50mm tall including the drip tip and threaded 510 pin, 33.5mm tall excluding the 510 pin and drip tip. The width of the tank is 24mm in diameter and the weight, including the coil is 46.6 grams.

Top view of the Zenith M tank with the top cap and drip tip fitted
Quarter turn Top cap removed showing the kidney bean shaped e-liquid filling port

The Zenith M tank has an e-liquid capacity of 2ml (EU version) or 4ml (standard version) and is a top fill design concealed below a removable top cap that has a quarter turn lock/unlock twist operation. Printed on the top cap are the symbols for lock and unlock with directional arrows indicating which way to turn the top cap to unlock for filling or lock to close.

Filling the Zenith M tank

When the top cap is turned to the open position, lift off the top cap. The e-liquid fill port opening is kidney bean shaped measuring approximately 9mm wide with a silicone rubber seal enclosing the fill port opening. Simply pass the tip of your e-liquid bottle through the seal to fill and once filled re-connect and lock the top cap.

2 drip tips; 510 Ultem and 510 Delrin come with the Coolfire Z80 NEX kit

The amber colored Ultem 510 removable MTL drip tip securely fits into the top cap with 2 O-Rings ensuring it won’t fall out. Included in the kit is a spare 510 wider bore delrin drip tip for RDL vaping.

Zenith M tank with the airflow open
Zenith M tank with the 3 air holes visible
Zenith M tank with the airflow closed

Airflow is controlled by the bottom quarter turn adjustable single cyclops slot. The airflow can be adjusted anywhere from fully open for RDL vaping which opens the full cyclops slot or slowly closing it down to the three, or two, or one small hole for MTL vaping. The resistance of the airflow ring is quite restrictive so will not inadvertently move unless you turn it.

0.8 ohm Z coil pre-fitted in the Zenith M Tank

To gain access to the Innokin push fit Z coil, turn the bottom airflow ring to the closed position then continue turning and it will unscrew and come away from the main part of the tank. The Z 0.8 ohm coil comes pre-installed so will already be fitted.

).8 ohm and 0.3 ohm Z coils that come in the Coolfire Z80 NEX kit

Two coils are included in the Coolfire Z80 NEX kit:

  • Z 0.8 ohm coil: 15W-18W – MTL (pre-installed)
  • Z 0.3 ohm coil: 30W-40W – RDL
Z coils are a push fit into the base of the Zenith M tank.

These coils do NOT screw in but simply push in. Two flat sides on the coil locate into the two flat indents in the base of the tank section. Do make sure these flat sides align in the base of the tank otherwise the coil won’t fit correctly. Removal of the coil is again pulled and NOT unscrewed from the tank.

As with all Innokin Z coils, the threaded 510 connection to the mod is part of the coil and NOT the base of the tank. Every time you replace the coil you’re effectively using a new threaded 510 screw connector. Perfect if you cross thread the male screw, it’s only the coil that’s affected and not the tank itself.

"Z" etched into the side of the Zenith M tank
"Zenith M" printed on the base of the Zenith M tank
Innokin etched into the side of the Zenith M tank

Branding is minimal with the words “INNOKIN” and “Z” etched into either side of the bottom airflow ring. Also the usual CE markings, along with “ZENITH M” and “DESIGNED BY P.BUSARDO VAPINGGREEK” are printed onto the bottom of the Zenith M tank.

Zenith M tank strips down into 7 different pieces

Stripping down the Zenith M tank is straight-forward and disassembles into 7 parts including the coil and 510 drip tip for easy cleaning and maintenance.

Replacing the Glass Tube on the Zenith M tank

To replace the glass tube, unlock the top cap and lift off. Unscrew the bottom airflow ring and remove the Z coil. Grasp the glass tube and unscrew the bottom knurled ring so the ring and chimney section will separate from the bottom of the glass tube. The top knurled ring will then simply separate from the glass tube. An O-ring attached to each knurled ring provide the airtight seal to the glass.

Spare O-rings that come with the Coolfire Z80 NEX kit

Several spare O-rings are included in the kit so if any on the tank get damaged or lost they can easily be replaced.

4 different colors of the Zenith M tank

There are 4 different color options of the Zenith M tank, these are:

  • Rainbow (seven color)
  • Stainless Steel (silver)
  • Gunmetal
  • Vacuum Plated Black

The machining of the threads and the quality feel of the Zenith M tank is up to Innokin’s usual high standard. It feels solid and robust and easily strips down into individual sections for easy cleaning. I’ve been a fan of the Z coils for a while as not only is the performance from them very good, I DO really like the 510 thread is part of the coil.

Innokin Zenith NEX Tank Design and Appearance


Innokin Zenith NEX Tank

Constructed out of stainless steel and pyrex glass, the Zenith NEX tank is 54.8mm tall including the drip tip and threaded 510 pin, 40.2mm tall excluding the 510 pin and drip tip. The width of the tank is 26mm in diameter and the weight, including the coil and drip tip is 62.5 grams.

Zenith NEX tank showing top airflow open
Zenith NEX tank showing top fill port

The Zenith NEX tank has an e-liquid capacity of 5ml and at present only come in this size option. It’s a top fill design with top airflow control, both of which are located on the top rotating ring. This top section that includes the removable drip tip rotates by about 140 degrees with end stops at each point.

Innokin Zenith with Fill port stopper visible

Turning the top cap to the left closes the airflow giving access to the fill port which is concealed behind a black silicone rubber stopper. Turning the top cap to the right opens up the variable airflow vent and conceals the rubber stopper.

Top airflow showing cyclops slot and 2 pin holes

Airflow is fully adjustable by rotating the top cap to align the cutout opening in the body. When fully open the single Cyclops slot and two small pinholes provide the RDL draw and when closed or with one or two of the pin holes open provides a tight MTL draw. Obviously positioning within these end stop points will further fine tune your draw. The resistance of the rotating top cap is very restrictive so will not move on its own.

Zenith NEX tank with the silicone rubber stopper showing
Zenith NEX tank with the silicone rubber stopper open showing the e-liquid filling hole

To gain access to the fill port opening, turn the top cap to close off the airflow. Continue turning until the large oval cutout (13.4mm by 6mm) passes over the black rubber fill port stopper. Lift open this stopper gives access to the 5.5mm by 4.1mm e-liquid fill hole. Simply place the tip of your e-liquid through the hole and fill. Once filled, rotate the top cap ensuring the rubber stopper is concealed and adjust the airflow to your desired draw.

Innokin Zenith NEX tank with the branding etched into the bottom section

Etched onto the top cap is the branding “NEX” and on the bottom removable section of the tank are “INNOKIN” and “ZENITH NEX” etched into the side of the tank. On the bottom plate of the tank are the usual CE markings, along with “DESIGNED BY P.BUSARDO VAPINGGREEK” and “PLATFORM SERIES”.

Two black 510 removable drip tips are supplied in the Coolfire Z80 NEX kit. The one that’s pre-fitted to the NEX tank is the MTL drip tip (4.2mm bore) and the one in the spares pack is a slightly wider bore RDL drip tip (6mm bore). Each one securely fits into the top cap with 2 O-Rings ensuring it won’t fall out.

Removing the base of the Zenith NEX to gain access to the coil

To gain access to the Innokin push fit Z coil, unscrew the bottom ring until it comes away from the main part of the tank. Two coils are included in the Coolfire Z80 NEX kit:

  • Z 0.8 ohm coil: 15W-18W – MTL (pre-installed)
  • Z 0.3 ohm coil: 30W-40W – RDL

These coils do NOT screw in but simply push in. Two flat sides on the coil locate into the two flat indents in the base of the tank section. Do make sure these flat sides align in the base of the tank otherwise the coil won’t fit correctly. Removal of the coil is again pulled and NOT unscrewed from the tank.

Zenith NEX tank showing the Innokin Z coil with its 510 threaded  bottom

As with all Innokin Z coils, the threaded 510 connection to the mod is part of the coil and NOT the base of the tank. Every time you replace the coil you’re effectively using a new threaded 510 screw connector. Perfect if you cross thread the male screw, it’s only the coil that’s affected and not the tank itself.

Stripping the Zenith NEX tank into its 5 separate pieces

Stripping down the Zenith NEX tank is straight-forward and disassembles into 5 parts including the coil and 510 drip tip for easy cleaning and maintenance. To replace the glass tube, unscrew the bottom section of the tank and remove the Z coil. Grasp the glass tube and gently prize it off from the chimney section. Two O-rings attached to the top and bottom sections provide the airtight seal to the glass.

Several spare O-rings are included in the kit so if any on the tank get damaged or lost they can easily be replaced.

There are 3 different color options of the Zenith NEX tank, these are:

  • Stainless Steel (silver)
  • Gunmetal
  • Black

My only criticism of the Zenith NEX tank is the tight restriction of the rotating top cap. While it should be resistive enough so it doesn’t move of its own accord, I found rotating it to fill with e-liquid was quite difficult. I’m sure over time with use the rotating top cap will become easier.

Innokin Coolfire Z80 NEX Functionality


Coolfire Z80 NEX set to 6 watts
Coolfire Z80 NEX set to 80W

The Innokin Cooflire Z80 NEX is a variable wattage (6W-80W) mod, adjustable using a +/- rocker button with fire button control and variable airflow. A separate lock/unlock switch disables the mod from working to stop accidental firing. The user interface is a 0.96 inch TFT display screen which shows all of the set parameters with an additional menu to adjust the screen timeout and vape duration.

Each of the display parameters are displayed on the 0.96 inch TFT screen when any of the control buttons are pressed as follows:

Main Display Screen

Main display on the Coolfire Z80 NEX
  • Battery level indicator with color changing bar
  • Numerical 3 digit Wattage levels
  • Lock / Unlock
  • Coil resistance reading
  • Puff counter
  • Vaping time reading
  • Graphical display
  • Voltage reading

Quick Start Operation

  • Fire button pressed 3 times turns the device on or off
  • Fire button and + button shows battery charge, coil resistance and puff counter
  • Fire button and – button brings up the Menu options
  • Hold + and – button till display flashes then press + or – button to increase/decrease the wattage
  • Manual lock/unlock switch to the left locks the device
  • Manual lock/unlock switch to the right unlocks the device

Menu Options

Menu options on the Coolfire Z80 NEX

When the fire button and – button are pressed and held together, the following Menu options are highlighted:

  • TIMEOUT: – Screen timeout adjustable between 5 – 180 seconds
  • CUTOFF: – Vape cut-off adjustable between 3 – 18 seconds
  • DEVICE ID: – Current software code
  • EXIT: – Returns to Main display
Status menu on the Coolfire Z80 NEX showing battery icon and voltage, coil resistance and puff counter

When the fire button and the + button are pressed and held together, the following status menu is displayed:

  • Battery Icon with color changing bar and numerical voltage reading
  • Coil Resistance
  • Puff Counter

The battery icon bar in the status menu and on the main display will reduce and change color as the battery voltage reduces:

  • Green – 30% – 100% of remaining charge
  • Orange – 10% – 30% of remaining charge
  • Red – Less than 10% of remaining charge

To reset the puff counter, press the +/- rocker button to highlight the “CLEAR” icon. With the icon highlighted, press the fire button and the puff counter will be reset.

Powering up the Coolfire Z80 NEX

When you first install the battery and press the fire button, the display screen will display “INNOKIN” and “Z80 NEX” with a message below saying “Click 3 X Power On”. Press the fire button 3 times and the Main display screen will be displayed.

If the manual lock/unlock switch is set to LOCK when you try to power up, the message “LOCK” will appear in red. Switch the manual lock/unlock switch to the unlock position and it will power up.

Protections

The Coolfire Z80 NEX will display the following messages on the TFT display screen when the following conditions occur:

  • LOW VOLT – Battery too low
  • COIL CHECK – Tank not connected
  • TIME OUT – Vape duration exceeds the time set
  • HIGH TEMP – PCB temperature is too high
  • COIL SHORT – Short circuit detected
  • LOW RES – Coil resistance is too low

Increasing/Decreasing the Wattage Level

Pressing the + or – rocker button will initially have no effect. If you want to increase or decrease the power levels you will first have to hold down both the + and – button until the numerical power level flashes.

When the wattage value starts to flash, release the button and then press the button again. This will now increase or decrease the wattage level, depending on which button you’re pressing. The wattage will increment in 0.5W steps from 6W to 20W and then 1W steps from 20W to 80W.

The +/- rocker button does a round robin so when you reach the maximum wattage value (80W), the next press will take you to the minimum value and vice versa.

Manual Lock/Unlock Switch

Coolfire Z80 NEX set to unlock
Unlock displayed on the Coolfire Z80 NEX

When you place the manual lock/unlock switch to the right position, the unlock padlock icon is visible on the left side of the switch and the TFT display will show a green unlocked padlock icon with the words “Unlocked” underneath. In this position, the fire button and +/- rocker button are active.

Main display on the Coolfire Z80 NEX shows a small locked icon underneath the "W".
Locked icon on the Coolfire Z80 NEX display

Sliding the switch to the left position will initially bring up a red locked padlock icon with the words “Locked” on the TFT display, the locked (closed) padlock icon is visible on the right side of the switch and the main TFT display with indicate a small orange locked padlock icon underneath the “W” symbol in the top left corner of the display.

In the locked position, the fire button and +/- rocker button become inactive.

Screen Timeout

Screen Timeout menu on the Coolfire Z80 NEX display

When selecting the screen timeout menu, you can specify the length of time the main display screen remains illuminated once the fire button or +/- rocker button is released.

Timeout set to 5 seconds
Timeout set to 10 seconds (default)
Timeout set to 180 seconds

The default setting is 10 seconds but you can select a value from between 5 seconds – 180 seconds.

Cut-Off

Cutoff menu on the Coolfire Z80 NEX

When you press and hold the fire button to vape, the voltage that’s applied to the coil will remain for the duration that’s been specified in the CUT-OFF menu, or sooner if you stop pressing the fire button.

If you press and hold the fire button and reach the time you’ve set in the CUTOFF menu, the display will indicated “CUTOFF” and will stop firing. This is a safety feature to stop accidental prolonged firing of the device.

Cutoff on the Coolfire Z80 NEX set to 3 seconds
Cutoff menu on the Coolfire Z80 NEX set to 18 seconds

The default setting is 10 seconds but you can select any value from 3 seconds to 18 seconds.

Innokin Zenith M / Zenith NEX Tank Performance


Z coils in the Coolfire Z80 NEX kit showing the min and max wattage levels on each of the coils

Two coils from the Innokin range of Z coils are supplied with the kit irrespective of which version tank it comes with (0.3 ohm and 0.8 ohm).

Z 0.3 Ohm Coil

Innokin 0.3 ohm Z coil

Innokin specify the optimum wattage range for this coil is between 30W-40W, which for reference is printed on the coil casing and they say it suites an RDL style draw. I would also mention that when the airflow is selected to open, a very good DTL is obtained.

After priming and slowly bedding in the coil at a low wattage, I found the flavor and vapor started to kick in for me at around 10W. Slowly increasing the wattage up to 15W and then 20W improved the flavor and vapor produced.

My sweet spot for this coil was around 25W in terms of very good flavor and vapor production. With the airflow fully open I was getting a very good DTL vape although slightly closing off the airflow did give me a really nice RDL vape style.

Taking the wattage on this coil through the minimum and maximum recommended wattage slightly enhanced the flavor and increased the speed of draw but I felt a slower draw suited my style of vaping more and still produced really good results.

Having used the 0.3 ohm Z coils previously in the Zenith II tank, on average I was achieving approximately 6 weeks of vaping before the flavor started to drop off.

Z 0.8 Ohm Coil

Innokin 0.8 ohm Z coil showing the min and max wattage levels

Innokin specify the optimum wattage range for this coil is between 15W-18W which for reference is printed on the coil casing. Although the style of vaping is specified as MTL, this coil is equally at home when the airflow is set to open producing an RDL and even a DTL style draw.

Once primed and bedded in, the flavor and vapor was present at the minimum wattage setting the Coolfire Z80 NEX would go down to (6W). Increasing the wattage to 8W really started to bring out the flavor of my e-liquid and was producing quite decent vapor. At 10W the flavor and vapor was really good and if I’m honest I would vape at this wattage all day long.

Setting the wattage to the minimum Innokin recommend of 15W and the maximum of 18W produced plenty of flavor and vapor from a short 1 second draw but I felt it was too intense and overpowered. Vaping at this power level did occasionally produce dry hits which will impact the lifespan of the coil.

Throttling back to between 10W to 12W gave me the best results for this coil. Flavor was really good, vapor was much more than expected and with the airflow set to just 1 or 2 small holes showing produced a tight MTL draw. Opening the airflow suits a RDL draw and with the airflow fully open a DTL draw is also possible with equally as impressive results. Irrespective of the airflow setting, the draw is smooth but does produce a little noise.

Any Leaks?

Zenith NEX and Zenith M side by side

Throughout the time using the Zenith M and Zenith NEX tanks there was no evidence of any leaks when using either of the supplied coils. Obviously as the coils get older leaking can start to occur but I can say that I’ve been switching both the coils in and out of the tank for 3 weeks now with no problems.

Innokin Coolfire Z80 NEX Battery Performance


18650 battery inserted into the Coolfire Z80 NEX mod

The Coolfire Z80 NEX mod is powered by a single external 18650 replaceable and rechargeable battery.

Throughout my time reviewing and using the Innokin Coolfire Z80 NEX with the supplied coils, I used my Samsung 20S battery (30A/2000mAh). On average I was achieving well over a day’s vaping when using the 0.8 ohm coil at around 10W before needing to fit a new battery or recharge. Swapping out the coil for the 0.3 ohm and vaping at 25W decreased my vape time between charges to just under one day.

Obviously these vape times are very subjective and depend on several factors:

  • Your vaping style
  • Type of coil you’re using
  • Capacity of your battery
  • Age and condition of your battery
  • Power level (wattage) you vape at
Coolfire Z80 NEX TFT display showing 0.5W adjustments when under 20W

The Coolfire Z80 NEX indicates the status of the battery on its display so you can keep an eye on the remaining charge of your battery. The battery icon will change color and reduce in size as the charge diminishes:

  • Green – 30% – 100% of remaining charge
  • Orange – 10% – 30% of remaining charge
  • Red – Less than 10% of remaining charge
Status menu on the Coolfire Z80 NEX shows the numerical battery voltage

Alternatively you can press the Fire button and + button together which will show the battery icon with its appropriate charge color with a numerical voltage value below it.

Once the battery is depleted of its charge, the Coolfire Z80 NEX will flash up a “LOW VOLT” prompt on the TFT display. At this point you will have to re-charge your battery or swap out for another fully charged battery.

The Coolfire Z80 NEX does have pass-through vaping so you are able to vape while your battery is being charged in the mod. I do however recommend charging your battery in a dedicated external battery charger and replacing the battery with a fully charged one each time.

To ensure you’re using the right capacity battery for the wattage you’re intending to vape at, you can use our Battery Amp Drain calculator to determine the most suitable battery for your vaping requirements.

How do I Fill the Zenith M / Zenith NEX Tank?


How do I fill the Zenith M tank with e-liquid

Depending on which tank you have with your Coolfire Z80 NEX kit, you remove the quarter turn top cap on the Zenith M tank to fill or rotate the top ring to align the fill port opening on the Zenith NEX tank.

Filling the Zenith M tank with e-liquid

Pass the tip of your e-liquid bottle through the filling port and fill with e-liquid. Once filled, remove the e-liquid bottle and close the fill port opening. Do ensure you don’t let the level of e-liquid fall too low in the tank before filling otherwise you could prematurely destroy your coil.

Prime the Z coil by dripping a few drops into each wicking port

Quick Tip: If you are filling the tank for the first time, drip a few drops of e liquid onto the wick of the coil first. Push the coil into the base of the tank then fill and leave to stand for approx. 10-15 minutes before you start to vape. This will help saturate the wick fully in e-liquid and help prolong the life of your coil.

How do I Change the Coil in the Zenith M / Zenith NEX Tank?


When the coil you’re using starts to loose flavor/vapor, shows a “Check Atomizer” / “Atomizer Short” or your e-liquid starts producing a burnt taste it’s time to replace your coil with a new one.

Unscrew the base of the Zenith M tank to gain access to the Z coil

Unscrew the Zenith tank from the Coolfire Z80 NEX mod. Grasp the top section and glass body of the tank and unscrew the bottom metal section until it’s removed giving you access to the coil. If you’re doing this on the Zenith M tank you first close the airflow slot and continue turning to unscrew.

Removing the Z coil from the base of the Zenith M tank

The Innokin Z coils are a push fit type therefore simply pull the coil away from the bottom of the tank and replace with a new one. Removing the coil is easiest by grasping the threaded 510 connector at the bottom of the coil.

Align the coil correctly when inserting the coil into the Zenith M tank.

When replacing the coil, ensure the two flat sides on the coil line up with the two indents of the tank so it fully locates into the tank opening. Once the coil is located it shouldn’t turn. If it does then it’s not located correctly therefore carry on turning the coil until it latches in the indents.

Zenith M tank fully assembled

Re-connect the base section to the main tank body and carefully screw the two sections together. Make sure you don’t over-tighten but make a firm seal.

Note: If the tank has e-liquid in it while you’re removing the coil, e-liquid will spill from the tank. The best method to avoid this or to keep e-liquid spillage to a minimum is to hold the tank upside down (drip tip pointing downwards), place your finger tightly over the opening of the drip tip and then remove the coil.

Replace with a new coil while still holding your finger over the drip tip. Turn the tank the right way up and take your finger off the drip tip. Resecure the base section ensuring it’s securely fitted but not over tightened.

Fill the tank up with your e-liquid using the procedure outlined in How Do I Fill The Zenith Tank.

Do ensure that your new coil is primed and when filled is left to stand for 15 minutes so the e-liquid fully saturates the wick. Bed your new coil in by first vaping at a low power level and slowly increase the wattage taking a few draws each time until you reached your desired draw. See our guide on Prolonging the Life of your Coil.

How do I Charge the Innokin Coolfire Z80 NEX Mod?


As with most external battery mods, there are always 2 ways which you can charge the battery. Either in the mod itself or using an external charger (recommended).

Charging cable plugged into the Coolfire Z80 NEX

The Coolfire Z80 NEX Type-C USB charging port is positioned just below the lock/unlock switch on the front panel. A Type-C USB charging cable comes supplied with the kit, therefore simply connect this cable into the USB port and the other end into a suitable USB power source. The specified charging circuit of the Coolfire Z80 NEX is 5V/2A.

Removing the battery in the Coolfire Z80 NEX to fit a freshly charged battery

Alternatively, and I would strongly recommend this, when your battery is exhausted simply remove the battery from the bottom of the Z80 NEX and replace it with a fresh fully charged battery. I tend to have several spare fully charged batteries to hand so I’m never without a working vape.

When the battery in the Coolfire Z80 NEX becomes discharged, the display will indicate “LOW VOLT” and you will no longer be able to vape. Once this happens you will need to recharge or replace your battery.

Charging display on the Coolfire Z80 NEX
Close up view of the charging display on the Coolfire Z80 NEX

If you’re charging the battery in the Coolfire Z80 NEX mod, when it’s first placed on charge the main display will briefly illuminate showing the battery icon incrementing with a charging symbol to the left. After approximately 6 seconds the display will switch to a single battery icon screen which cycles with a numerical percentage value of charge underneath.

After a further # seconds the display will extinguish and go blank for the remaining duration of the charging cycle meaning there is no visual indication that the battery is being charged. Note: # is the time set in the TIMEOUT menu.

To see the charge status of your battery, you will have to press either the fire button or the +/- rocker button on the Coolfire Z80 NEX to bring up the display again but it will only remain visible for another 6 seconds plus the TIMEOUT value. Full charge is achieved when the battery indicates 100%.

Charging time from full discharge to full charge took approximately 1 hour on my 2000mAh battery when using a standard 5V/2.1A source. This time will vary depending on the current rating of the source plug and the capacity of the battery you’re using. Specifying the exact time is also hindered as the display doesn’t remain illuminated and gives no indication when full charge is reached until you press one of the control buttons.

The Coolfire Z80 NEX has pass-through so you are able to vape while it’s being charged but this will increase the overall charge time.

As with any vape device, ALWAYS charge the mod resting on a non-flammable surface and NEVER leave your mod unattended whilst charging.

Use a dedicated battery charger to charge your batteries

If you prefer to charge your battery externally and I really would recommend doing this, always use a reputable charger. Please take a look at our guide on the Best 18650/21700 Battery Chargers.

Innokin Coolfire Z80 NEX Kit Price


The Coolfire Z80 NEX mod with the Zenith NEX tank or the Zenith M tank has only just been released and at present doesn’t have a defined sale price. One or two websites are showing it around the £40 pound / $30 dollar mark but are pre-order.

I would suggest if you are on the lookout for one then search around for the best deal.

Innokin Coolfire Z80 NEX Kit Review Verdict


Innoknin Coolfire Z80 NEX kit review verdict image

Pros

  • Very good build quality and design
  • Looks and feels impressive
  • Compact
  • Removable 18650 battery
  • Type-C fast charging (2A)
  • Manual lock/unlock switch
  • No button rattle
  • Comfortable to hold
  • Easy to use menu structure
  • Great performance from both Z coils
  • Very good adjustable airflow for MTL, RDL and DTL
  • Top fill and top airflow on Zenith NEX tank
  • No leaking
  • Great range of different resistance Z coils
  • Zenith M and Zenith NEX tanks perform very well

Cons

  • Battery on charge screen extinguishes after a few minutes
  • No Smart coil detect and maximum wattage limiter
  • Top cap on Zenith NEX tank is quite difficult to turn

Innokin Coolfire Z80 NEX Kit Review Summary


Innokin Coolfire Z80 NEX with the Zenith M tank, spare 0.3 ohm coil and wide bore drip tip

The Innokin Coolfire Z80 NEX is a really good compact quality mod and a worthy addition to the Coolfire range of devices. Firing up to a maximum of 80W with an external 18650 battery, a straight-forward menu structure and a manual lock/unlock switch makes this a breeze and pleasure to use.

Comparison between the Zenith NEX and Zenith M tanks

Paired with either the Zenith M or Zenith NEX tanks makes this a great mod kit combination and worked faultlessly. Both tanks are equally as impressive with the obvious difference being the filling method and airflow control.

Zenith M tank with the two supplied Z coils

Performance from both Z coils in the kit are very good in terms of flavor, vapor and longevity. Compatible with the complete range of Z coils further enhances the versatility of this kit.

I was a big fan of the original Coolfire Z80 kit that included the Zenith II tank and have been using it in rotation with other devices for the last 4 years and it’s still working perfectly. The quality of the Coolfire Z80 NEX kit follows in the same vein so we can expect it to still be working in 4 years time.

Hope you enjoyed this review on the Innokin Coolfire Z80 NEX kit and found it useful. If you have any questions or feedback, please feel free to leave us a comment below.

Comments 8

  1. Great review!
    I currently have the M tank on EZ Tube mod and I’m usually using the 0.6 coil (not the new version as we don’t have it in my country yet) at 11w.
    For some reason the flaour almost completely disapear after maybe 3 days of use and its driving me crazy.
    You wrote you get 6 weeks of use before the flavour is startind to drop off and I want wondering if the new coils are the reason?
    Also, is it worth it to get the NEX tank if I already have the M? Will it perform better in regards to flavour and coil liffe or be same?
    Thanks in advance!

    1. Hi Rotem, thanks for your nice comment on my review, glad you liked it. Regarding the flavour loss on the Z 0.6 ohm coil, its been a while since I’ve used this coil as the EZ Tube and Coolfire Z80 comes with the 0.3 and 0.8 ohm coils and I tend to stick with these two. I did use the 0.6 ohm coils when reviewing the Innokin Z60 with the Zlide tank and didn’t have flavour loss as you describe after approx 3 days. I find with all the Innokin Z Coils, they perform great even after several weeks of use.

      When you loose flavour after 3 days, do you notice a decrease in vapour too? There are a couple of reasons this may happen and it could be down to the e-liquid you’re using or you’ve been unlucky with some under-par coils. I have know 1 or 2 coils in a pack not to perform as well as others, sometimes even the whole pack. Regarding e-liquid, desert flavours or heavily sweetened flavours can reduce the life of the coil.

      I tend to stick with unsweetened fruit flavours that I mix myself, normally at a 50PG/50VG ration and have got in the habit of still drawing a split second after I release the fire button which helps to pull e-liquid through the coil ready for the next draw. This helps improve coil life.

      Regarding the NEX tank, I don’t feel it would perform any better than the M tank you’re using, both are good tanks but just function differently. The NEX tank is a top airflow which I do like but if I’m honest, I prefer using the M Tank more.

      Hope this helps Rotem and thank you again for your nice comment about the review.

    1. Hi Mary, you’ve not given us much to go on. What tank are you using and what wattage is it set at and is it a new coil? I would suggest unscrewing the tank, turn it upside down and tap the mouthpiece on tissue paper continually to see if any juice comes out as it may be flooded. Once no more juice comes out, reconnect the tank and see if it vapes as it should do.

  2. Absolutely fantastic review / user guide. I just bought the Innokin Coolfire Z80 NEX (with the Zenith M tank – UK purchase) and hunted through tinternet for some advice. Nothing matched this for clarity and detail; not even close. I would have been lost and confused based on a few some other reviews and YouTube vids – this was perfect. All of it was useful but particularly the parts about wattage guides for different coils, as it was based on real usage, which is more accurate than the manufacturer guides, for me anyway. Brilliantly written guide, many thanks.

    1. Hi JR,
      Thanks so much for taking the time and giving your great feedback about our review, it’s really appreciated. We try to cover as much detail as we can in each of our reviews. Hope your enjoying using the Coolfire Z80 Nex with the Zenith M tank. I’ve recently bought the Zenith NEX tank so will update this review later to include that variant. Thanks again.

      1. çok basit hiç bir özelliği olmayan basit bir cihaz ben hata yaptım şimdi aldım daha ben bobin yenileme özelliği var sanıyordum ama basit bir cihaz almışım pişman oldum aldığıma

        1. Hi Sahan, I’ve translated your comment so our readers understand what you’re asking as follows:
          “It’s a very simple device with no features. I made a mistake and bought it now. I thought it had a coil regeneration feature, but I bought a simple device and I regret buying it”.
          I did point out within our review that the Coolfire Z80 NEX kit is a more simplified version of the original Z80 and doesn’t include Coil Refresh and FO technology. However, in my opinion the omission of these two features doesn’t distract from the Z80 NEX still being a very good device especially as the kit comes with the enhanced Z coils and either the NEX tank or the Zenith M tank. I disagree with your comment of being very simple with no features as it includes everything you would expect from a device of this type. Coil regeneration on the earlier Z80 was a function that Innokin included to increase the longevity of the Z coils but to be honest I found this very difficult to quantify. Priming the coils first and not over-stressing them increase the longevity far more than a coil regeneration feature.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.