Innokin Trine SE Pod Kit Review Featured Image

Innokin Trine SE Pod Kit Review | Simplified version of the Renowned Trine Kit

Richard WinterPod Vapes Leave a Comment


Innokin Ice Blue Trine SE Pod Kit

Innokin have just released a cost effective and simplified entry level addition to the Trine range of devices called the Trine SE pod kit which we are reviewing here today. Earlier this year we reviewed their Trine pod kit with its removable battery pack which shook the vaping industry and proved to be a resounding success.

Original Innokin Trine Pod Kit
Original Trine Pod Kit

This earlier Trine device with its 1000mAh removable and rechargeable battery pack was a dual activated device, incorporated a small 0.65 inch OLED display, featured variable wattage with airflow control and introduced us to the very popular top-fill 2ml refillable Vcap pods.

Innokin Trine SE Pod Kit Showing the two Vcap pods in their sealed capsules and Quick Start Guide

The great news is this new Trine SE pod kit follows the same formula (style, size and weight), uses the same removable 1000mAh battery pack, has airflow control and uses the same Vcap series of pods. Innokin have removed the small OLED display and fire/variable wattage control button leaving a tri-color LED to monitor the battery status, thus making it a very simplistic and cost effective (cheaper) alternative for no fuss hassle free vaping.

The Original Trine Pod Kit with the OLED display and fire button
Innokin Trine
Innokin Trine SE with the LED display
Innokin Trine SE

Both the Trine and now the new Trine SE are Eco friendly, sustainable pod devices with great performance and longevity. The Trine SE is a beginner friendly fill and go device whereas the Trine has that little bit of extra control……both great devices so the choice is yours!

I would recommend reading our earlier Trine Pod Kit Review in conjunction with this one as it goes into a little more detail on the battery pack and Vcap pods.

As always we will give a quick overview covering the main points and features of the Trine SE and then jump into the main body of the review.

Overview of the Innokin Trine SE Pod Kit

As we mentioned above, the Innokin Trine SE pod kit is an entry level device in the Trine series of products and mimics the original Trine pod kit with the exception of a fire/control button and OLED display.

Innokin Trine SE, two Vcap 2ml top fill pods and the Quick Guide

This in effect makes the Trine SE an auto draw activated device with non-adjustable adaptive wattage up to 25W. The optimum operating wattage is automatically set for each Vcap pod type, two of which (0.6 ohm and 0.8 ohm) are included in the kit.

Innokin Vcap pod with the duckbill mouthpiece removed

These Vcap pods are used on the original Trine pod kit and on the Endura V pod kit which we’ve also reviewed. They have a 2ml e-liquid capacity with a removable top fill mouthpiece and a colored band that makes for easy identification of the different resistance pods.

Tri-color LED and airflow control lever on the Trine SE

The OLED display on the earlier Trine is replaced with a tri-color LED that monitors the battery status during use and while it’s being charged. Variable airflow control remains the same via a side located slider lever which provides Mouth-To Lung (MTL) and Restricted-Direct-To-Lung (RDL) vaping styles (pod dependent).

Innokin Trine B1000 battery pack that slots into the base of the Trine SE

Powering the Trine SE is the removable rechargeable 1000mAh B1000 battery pack that slots seamlessly into the bottom of the Trine SE body. Charging is carried out via the side located Type-C USB port specified as 5V/1.0A and will fully charge the device/battery in just over an hour.

Trine dual battery pack charger (Trine Power Hub)

An external dual battery charger (Trine Power Hub) is available to purchase together with additional battery packs which greatly increases not only the longevity of the device but provides uninterrupted vaping.

There are a total of 6 different colors in the Innokin Trine SE kit range:

  • Ice Blue
  • Graffiti Pink
  • Matte Black
  • Mirror Gold
  • Matte Green
  • Mirror Silver
Mirror Gold Trine SE
Graffiti Pink Trine SE
Matte Green Trine SE
Ice Blue Trine SE

We received 4 different colors of the Trine SE which can be seen throughout this review although I’ve focused on the Ice Blue color as it’s a great finish.

I would like to thank Alisa at Innokin for sending us the Trine SE pod kits for the purpose of this review. Our review is completely unbiased and only reflects what we found and observed while using the supplied kits. If you click on any of the buy buttons, we may receive a small affiliate commission but at no extra cost to you.

Innokin Trine SE Pod Vape Kit Review

Contents

Features and Specifications

Innokin Trine SE

  • Construction: Aluminium Alloy Body + PCTG Vcap Pod
  • Dimensions: 110.93mm (H) x 25.86mm (W) x 15.08mm (D)
  • Weight: 50 grams including Battery and Pod
  • Output Wattage: 25W Max (pod specific) *Note
  • Output Voltage: 2V – 4.35V
  • Output Mode: Adaptive Wattage (pod dependant)
  • Firing Mechanism: Draw Activated
  • Battery Specification: Removable 1000mAh Rechargeable Battery Pack
  • Charging: Type-C USB 5V/1.0A
  • Charging Time: Approx 1 Hour
  • Pod Type: Vcap Refillable with Integrated Coil
  • Airflow: Variable Slider Control
  • E-liquid Capacity: 2ml
  • Filling Method: Concealed Top Fill
  • Coils: Non-Replaceable 0.6, 0.8 or 1.2 ohm Mesh Coils
  • Mouthpiece: Removable Duck-Bill Style
  • Pod Connection: Magnetic
  • Display: Tri-color Changing LED
  • Vape Cut-Off Time: 10 Seconds
  • 6 Different Colors Available
  • Safety Protections

Note: The output wattage is adaptive and dependent on the resistance of the fitted Vcap pod. The Innokin Trine SE will auto detect the resistance of the coil/pod and set the optimum wattage for that particular pod.

What’s in the Box?


Innokin Trine SE What's In The Box
  • Innokin Trine SE Device Body
  • 1000mAh Battery Pack
  • Vcap 2ml 0.6 ohm Pod
  • Vcap 2ml 0.8 ohm Pod
  • Quick Start Guide

Note: A Type-C USB charging cable is NOT included in the kit. To charge the device you will need to purchase or use an existing Type-C cable.

Innokin Trine SE Pod Kit Packaging

Trine SE and Vcap Pods housed in a plastic tray

A slight deviation here from Innokin’s usual 100% recyclable packaging as the inner tray that houses the Trine SE and Vcap pods is plastic. The Vcap pods are also sealed in individual plastic foil backed capsules.

Trine SE different color packaging

The packaging box is colored to match the included device and measures 125mm high by 88.5mm wide and 21mm deep. It’s a lift to open top with a slide out plastic insert that houses the Trine SE, the two Vcap pods and the quick start guide.

Front view of the Trine SE packaging

On the front of the box is a photo of the Trine SE with its replaceable battery pack in the color of the included device together with the branding “INNOKIN” and “TRINE SE”. The colored background to this image has “3 in 1” which relates to the “ABC Solution – Reshape, Replace, Redefine” that we saw on the earlier Trine packaging. Below this is the standard full width nicotine warning.

Back view of the Trine SE packaging

The reverse side of the box details the “Package Contents”, “Manufacturer’s Details”, “CE/Kite mark” logo’s, “Trine SE Kit Color”, “Authentication scratch and verification label” and the nicotine safety warning.

Left side view of the Trine SE packaging
Right side view of the Trine SE packaging

On the left side of the box are 4 circular images that highlight “Auto-draw Activated”, “Max 25W Output”, “Top Refills” and “Airflow Control”. The right side displays “TRINE SE”.

I’m still pleased to see that Innokin continue to include the following statement above the nicotine warning…

Nicotine statement on the Trine SE packaging

“The following warning applies when the product is used with nicotine-containing e-liquids”.

Being forced by law to put the warning of “This product contains nicotine which is a highly addictive substance” never seemed right to me as it doesn’t contain nicotine unless the user wishes to add it.

Preparing to Use the Innokin Trine SE


Graffiti Pink Trine SE with both Vcap pods

Once you’ve unboxed your Trine SE kit and removed it from the inner plastic tray, remove one of the Vcap pods from their sealed foil backed capsules. These Vcap pods have a wide colored band inside the pod that depicts the coil resistance of the pod as follows:

  • 0.6 ohm = Orange band
  • 0.8 ohm = Blue band
Mouthpiece removed from the Vcap pod and showing the fill port opening hole

Remove the snap-fit duckbill style mouthpiece from the top of the Vcap pod. There are two small holes in the top of the pod; use the colored outer hole for filling with e-liquid, do NOT try and fill through the center black colored hole.

Fill the Vcap pod with e-liquid through the colored outrer hole

Once you’ve filled the pod with your e-liquid, refit the duckbill mouthpiece ensuring it clicks back into place and leave the pod to stand for 10-15 minutes before you use to allow the e-liquid to fully saturate the coil.

Vcap pod inserted into the Trine SE

Insert the filled Vcap pod into the Trine SE body pod recess. When inserted, the Trine SE rectangular LED will illuminate for approximately 3 seconds in the color that matches the remaining battery charge and then extinguish.

There is no on/off button or fire button so as long as the battery has a nominal amount of charge you’re ready to vape.

Innokin Trine SE Design and Appearance


Trine SE in 3 parts; battery, Trine SE body and Vcap pods

The Trine SE pod kit consists of 3 separate parts, the Vcap pod, the Trine SE body and the removable rechargeable battery pack. For clarity we’ve detailed each of these parts in the 3 following sections.

Trine SE Body

Trine SE body from all sides

The Innokin Trine SE is a pen style (flattened tube shape) device constructed out of Aluminium Alloy and measures 88.2mm tall (excluding the pod) by 25.86mm wide by 15.08mm deep and weighs in at a very lightweight 21 grams (excluding the battery pack and pod).

It’s a fixed wattage pod device with an adaptive power output up to 25W. Smart coil detect recognizes the resistance of the Vcap pod that’s fitted and sets the optimum wattage for that particular pod type.

The Trine SE is draw activated only as there is no fire button. When you draw on the mouthpiece the rectangular tri color changing LED on the front face of the Trine SE body will illuminate, providing a visual indication of the remaining battery charge status as follows:

Trine SE with the RED LED illuminated
Trine SE with the YELLOW LED illuminated
Trine SE with the GREEN LED illuminated
  • Red LED = <10% of remaining charge
  • Yellow LED = 10% – 30% of remaining charge
  • Green LED = >30% of remaining charge
Trine SE Variable Airflow Slider
Trine SE Airflow Slider just protrudes from the side of the casing

Variable airflow control is carried out by a slider lever (right-hand side) on the opposite side edge to the USB charging port, which is only very slightly raised above the surface of the panel. The movement of this slider is restrictive so it won’t inadvertently move on its own and has a very positive feel to it. Mouth To Lung (MTL), Restricted Direct To Lung (RDL) and even Direct To Lung (DTL) vaping styles are achieved by the combination of the airflow slider and the type of pod (pod resistance) you’re using.

Airflow Open on the Trine SE
Airflow half way on the Trine SE
Airflow Closed on the Trine SE

Restricting the airflow is performed by moving the slider upwards towards the top of the Trine SE body and opening the airflow by moving the slider downwards. The slider has a total of 3 holes in the movable plate so can be fined tuned to suit your style of draw.

Type-C USB charging port on the Trine SE

On the left hand side of the Trine SE body is the Type-C USB charging port, specified as 5V/1.0A. Charging is carried out using a Type-C USB cable which will fully charge the Trine SE in just over 1 hour. It does have ‘pass-through’ so you are able to vape while it’s being charged.

Note: The 1000mAh capacity removable battery pack has to be fitted into the Trine SE base in order to charge via the Type-C USB port. Alternatively you can purchase a Trine external dual battery charger (Trine Power Hub) and charge using this method.

B1000 Battery pack removed from the base of the Trine SE
B1000 Battery pack being inserted into the base of the Trine SE

The base of the Trine SE has the battery pack recess with two side edge cut-outs that locate with the two latching tags on the battery pack. Within this very deep recess are two + and – battery pins that align with the battery terminals on the battery pack when it’s fitted. The battery can be fitted either way around and has a flat base so when fitted easily allows the Trine SE to stand upright.

Trine SE pod recess showing the bar magnets, coil contacts pins and auto draw sensor

At the top of the Trine SE is a 13mm deep pod recess. It’s oval shaped so the pod can be fitted either way round. In the pod recess are 2 small rectangular magnets that locate with the pod when it’s fitted, 2 gold plated spring loaded coil contact pins, an auto draw control sensor and an airway chamber that leads down to the airflow control lever.

Trine SE branding
Innokin branding on the Trine SE

Innokin’s branding on the Trine SE is fairly discrete and kept to a minimum with the product name “TRINE SE” screen printed on the lower section of the body below the tri-colored LED. The reverse side of the Trine SE in the same position is the company name “INNOKIN”.

Innokin branding on the flat base of the battery pack

The only other markings are “INNOKIN” on the flat base of the battery pack.

With regards to safety features, the Innokin Trine SE provides the following prompts such as:

  • Vape Cut-Off: 10 seconds timeout
  • Low Battery Voltage (3.3V)
  • No Coil/Pod Detected
  • High Resistance
  • Low Resistance
  • Short Circuit

In summary, the Trine SE is very similar to the earlier Trine minus the OLED display and fire/control button. The design, appearance and simplicity of the Trine SE together with the build quality and robustness are equally as good.

B1000 removable rechargeable replaceable battery pack

The standout feature of the removable battery pack brings so many positives in terms of sustainability and longevity so I’m really pleased that Innokin are continuing to use this on the Trine SE.

Innokin Vcap Pod

Graffiti Pink Trine SE
Graffiti Pink Trine SE
Matte Green Trine SE
Matte Green Trine SE

The Innokin Trine SE pod kit comes supplied with two different resistance Vcap pods; 0.6 ohm (orange) and 0.8 ohm (blue). There is also a 1.2 ohm pod (green) which can be purchased separately. Innokin were kind enough to send us the 1.2 ohm Vcap pod to try and we have included this in our review.

Innokin Trine 1.2 ohm Vcap Pod

These Vcap pods are the same as we used when reviewing the original Trine and the Endura V so are compatible across the three devices.

Side angled view image of the Vcap pod
Side angled view image of the 0.8 ohm Vcap pod

Each Vcap pod has a 2ml e-liquid capacity and is constructed out of clear PCTG material. They are a leak free top fill system which is concealed under a removable duckbill style mouthpiece. Dimensions of the pods are 35.5mm tall (22.5mm when fitted) by 25mm wide and 15mm deep.

0.8 ohm, 0.6 ohm and 1.2 ohm Vcap pods

The different resistance pods are instantly recognizable by the colored silicone rubber bung at the base of the non-replaceable mesh coil:

  • 0.6 ohm pod = Orange
  • 0.8 ohm pod = Blue
  • 1.2 ohm pod = Green
Duckbill mouthpiece on the Vcap pod

At its tip, the snap fit mouthpiece is 20mm wide by 6mm deep tapering down to a 7mm oval opening that leads down to an internal circular chimney and onto the top of the coil.

Mouthpiece removed from the Vcap pod

To gain access to the e-liquid fill port, the mouthpiece is removed by levering the mouthpiece off the pod from front to back. This can be done with the pod in-situ or removed, whichever you find easier.

Outer colored fill port hole on the Vcap pod

Once the mouthpiece is removed, there are two circular holes in the top of the pod. The center hole has a black O-ring which leads down onto the top of the coil; do NOT use this hole for filling. The second outer hole is the e-liquid filling port and has a colored silicone membrane that you pass your e-liquid nozzle through.

Base of the Vcap pod

On the bottom of the pod are 2 small rectangular magnets that secure the pod and two circular coil contact plates that align with the corresponding connections in the Trine SE pod recess. There are also 2 open holes that provide the air intake.

As we’ve mentioned earlier, the coil is integrated into the pod and therefore is NOT replaceable. Once the coil has degraded and becomes unusable, the pod is disposed of and a new one fitted.

Inserting the Vcap pod into the Trine SE pod recess

Inserting the pod is straightforward enough, simply offer the bottom of the pod into the top recess of the Trine SE body and it will slide into this recess and be locked into place by the two bar magnets. When the pod is inserted the color changing LED will illuminate briefly in the color corresponding to the remaining battery charge.

Removing the pod is carried out by grasping the pod body and lifting away from the Trine SE body.

1.2 ohm green Vcap pod
0.6 ohm orange Vcap pod
0.8 ohm blue Vcap pod

Branding on these pods has “Vcap Pod”, “INNOKIN” and the “coil/pod resistance” with the recommended “best wattage”:

  • 0.6 ohm pod – Best between 20W – 22W
  • 0.8 ohm pod – Best between 12W – 14W
  • 1.2 ohm pod – Best between 11W – 12W

The wicking ports on the coils are a reasonable size and Innokin recommend using a 50/50 PG/VG e-liquid. I have also used 70VG/30PG through the two included pods with no problems of dry hits.

Innokin Trine Battery Pack (B1000)

Innokin Trine SE showing the removable battery pack and Vcap pods

The Innokin Trine SE pod kit utilizes the same rechargeable, removable and replaceable battery pack that was first introduced on the original Trine pod kit earlier this year.

It also features the industry’s first Eco-Safe battery discharge technology called EcoDrain, patented by Innokin, which allows you to safely discharge the battery before disposal, minimizing the risk of fire hazards. My only concern is that discharging the battery was carried out using the fire button on the earlier Trine. As the Trine SE doesn’t have a fire button I’m not sure how you would safely discharge the battery?

Replaceable Trine battery pack

As with any internal battery powered devices, once the battery fails to hold its charge after continued use, it becomes unusable and the whole device is then useless. The Trine and Trine SE on the other hand only require a new replaceable battery pack to keep them functioning for many years to come.

Model B1000 Trine SE battery pack

The Trine lithium-ion battery pack is a model B1000 meaning it has a capacity of 1000mAh and is rated at 3.80Wh/3.80V with a limited voltage of 4.35V. Innokin specify the battery is good for a minimum of 300 charge/discharge cycles so is expected to last in excess of 2 years.

If you are a user of DSL cameras then the battery pack that powers the camera is not too dissimilar to that which fits in the Trine SE pod kit. New Trine battery packs can be purchased for approx. £4.

Power contacts on the Trine battery pack

Dimensions of the B1000 battery are 45.7mm tall by 25.5mm wide and 13.3mm deep and weighs in at 21.3 grams. One end of the battery pack has 3 gold plated contact terminal plates; 2 outer negative terminals and 1 central positive terminal. This enable the battery to be fitted either way around in the battery recess of the Trine SE.

Base of the Trine Battery pack
Side latches on the Trine Battery Pack

The other end of the battery is flat with a matte black base and the brand name “INNOKIN” screen printed on the base. On each side edge of the battery pack are sprung plastic tags which align with the cut-outs in the base of the Trine body.

Different surface finish on the Trine battery pack that was used with the Trine Pod Kit

Note: The battery pack on the earlier Trine pod kit had a silver polished base within a diagonal etched mesh grid pattern. This is purely cosmetic as we’ve tried both battery packs in both devices and they work fine.

Placing the Trine battery pack in the Trine SE
Fitting the Trine battery pack in the Trine SE
Trine battery pack fitted in the Trine SE

When the battery is fitted into the Trine SE, these tags locate in the cut-outs and hold it securely in place. Removing the battery pack is carried out by pushing these tags in and removing the battery. These tags are quite stiff so they do take a little pressure to release the locking mechanism.

I mentioned in our earlier Trine review that the implementation of a removable battery pack is a fantastic idea and takes the smaller pen style pod device to a new level in terms of sustainability and longevity. This still stands as the Trine SE continues to use this battery pack.

Innokin Trine SE Functionality


Ice Blue Trine SE in hand

The Innokin Trine SE pod kit is as simple and straightforward to use as it gets. It doesn’t have any menu options to worry about, there are no adjustment controls or fire button, not even an on/off switch. Quite simply all that’s required is ensuring your Trine SE is charged and the Vcap pod contains e-liquid.

It’s a draw activated 25W max pod device with variable airflow control. It has non-adjustable wattage but uses “Smart” coil/pod detection meaning the Trine SE senses the pod resistance and automatically sets the optimum wattage level for the Vcap pod you’re using.

Pod ResistanceOptimum Wattage Levels
Vcap 0.6 ohms20W – 22W
Vcap 0.8 ohms12W – 14W
Vcap 1.2 ohms11W – 12W

Battery status is provided by a rectangular tri-color changing LED on the front face of the Trine SE body which shows the remaining battery charge status when you draw on the Vcap mouthpiece as follows:

  • Red LED = <10% of remaining charge
  • Yellow LED = 10% – 30% of remaining charge
  • Green LED = >30% of remaining charge
Charging the Trine SE via a Type-C cable

This LED also illuminates “red” when the Trine SE is placed on charge and remains illuminated until it reaches 90% of its full charge. The LED will then change to “green” for the remaining 10% of its charging cycle until full charge is achieved, at which point the LED extinguishes.

The Innokin Trine SE LED will show different prompts to highlight individual functions and the safety protections as follows:

Being Charged: LED will illuminate
Full Charge:LED extinguishes
Low Battery:LED flashes red 8 times
No Load/High Resistance: LED flashes green
Short Circuit:LED flashes
Auto Shut-Off (10 seconds):LED flashes 10 times

Airflow

Airflow slider on the side of the Trine SE case

The Innokin Trine SE has adjustable airflow control via a single slider lever on the side of the casing. Moving this lever upwards will decrease the airflow and restrict the draw, sliding it downwards will increase the airflow and provide an airy draw.

MTL and RDL vaping styles can be achieved by selecting the appropriate resistance pod and adjusting the airflow position as required.

Innokin Trine SE Pod Kit Performance


Vcap series of pods for the Trine SE

Two Vcap pods are supplied with the Trine SE pod kit; a 0.6 ohm Kanthal mesh pod and a 0.8 ohm Kanthal mesh pod. We received the additional 1.2 ohm pod and have included our findings on this one too.

We’ve reviewed the 0.6 ohm and 0.8 ohm Vcap pods, including the 1.2 ohm pod, during our review of the Trine pod kit earlier this year. The only difference in these pods is when used with the Trine SE, they operate at their fixed optimum wattage.

As always, when filling the pod for the first time, leave to stand for a good 10-15 minutes before you use it. This will ensure the e-liquid has fully soaked into the wicking material and prevent dry hits. It will also help prolong the working life of the pod. Equally do ensure you don’t let the e-liquid level in the pod run lower than the wicking ports of the coil otherwise this will destroy the coil/pod.

Innokin recommend using a 50/50 ratio e-liquid when using their Vcap pods which worked very well with no evidence of any leaks. I also used a 70VG/30PG ratio e-liquid through the pods with no problems of dry hits. These pods are compatible with both Freebase and Nic Salts.

Pod and best wattage range printed on the Vcap pod

Each of the Vcap pods has the coil resistance and the minimum and maximum recommended wattage range printed on the pod casing. The wattage range when used with the Trine SE is for reference only as the wattage is not adjustable.

Vcap 0.6 ohm Pod – Orange

0.6 ohm Vcap pod

Innokin specify the best wattage range for this pod is between 20W – 22W. Smart pod/coil detect automatically sets the optimum wattage of the Trine SE so I’m guessing it lies between this lower and upper setting.

With the airflow fully open, the draw produced was a restrictive DTL draw (RDL) while closing the airflow produced a very tight MTL draw. My preference of airflow for this pod was between half open to fully open.

Flavor from this pod was very good and the vapor at this optimum wattage was quite dense. I’ve been used to using the 0.6 ohm pod in the earlier Trine at a much lower wattage so was pleasantly surprised that at 20W+ the draw was smooth and quite.

Vcap 0.8 ohm Pod – Blue

0.8 ohm Vcap pod

Innokin specify the best wattage range for this pod is between 12W – 14W. Smart pod/coil detect automatically sets the optimum wattage of the Trine SE to fall between this lower and upper setting.

Flavor was really good with again dense vapor. Airflow wide open for a RDL draw or half open for a tight MTL draw gave great results. Shutting the airflow I found restricted the draw too much and muted the flavor.

The 0.8 ohm pod is another really good pod and on par with the 0.6 ohm pod. If I had to choose between the two I would opt for the 0.6 ohm pod as the vape was that little bit more intense.

Vcap 1.2 ohm Pod – Green (sold separately)

1.2 ohm Vcap pod

Innokin specify the best wattage range for this pod is between 11W – 12W. Smart pod/coil detect automatically sets the optimum wattage of the Trine SE to fall between this lower and upper setting.

The flavor and vapor was really good again and produced a nice tight MTL draw with the airflow just off the closed mark.

Even though the 1.2 ohm pod is designed for a MTL draw, I really enjoyed vaping this one with the airflow fully open with a RDL draw style.

Vcap Coil Summary

2 vcap pods supplied with the Trine SE kit

Both the Vcap 0.6 ohm and 0.8 ohm pods that came with the kit, including the additional 1.2 ohm pod are very impressive. Flavor and vapor from them is really good. I would rate all the Vcap pods as being excellent for flavor and vapor. Throat hit was also very good, even when using my 3mg strength e-liquids.

Longevity of the pods are pretty good and on average last a good couple of weeks before the flavor starts to drop off. I found when using the Vcap pods with the original Trine they lasted a little longer when I was vaping at a lower wattage.

Irrespective of what resistance Vcap pod I was using, I could change my vaping style from RDL to a tight MTL.

One point worth noting, because the Trine SE operates at a fixed wattage that’s close to the maximum wattage recommended for the type of pod you’re using, you can’t slowly bed the coil in at a lower wattage and build up to your sweet spot. It’s imperative you let the e-liquid fully saturate the coil before you start to vape and take a few short draws first to bed the coil in.

Innokin Trine SE Battery Performance


The Trine battery pack for the Trine and Trine SE kits

The Innokin Trine SE is powered by a replaceable and rechargeable 1000mAh capacity battery pack which as we’ve already mentioned has several advantages over the standard fixed integrated battery pod devices. It does come with a nominal charge but I would recommend fully charging the battery pack first before you use it. Our How to Charge section covers what you can expect when charging the Innokin Trine SE.

Charging time will take just over 1 hour to fully charge via the on board Type-C USB port and on average gave nearly a day’s vaping time before the battery needed charging again. I found this to be about the same time when using the 0.6 ohm and 0.8 ohm Vcap pods.

Battery performance is always subjective and depends on type (resistance) of pod you’re using, your vaping style and condition of your battery. My vape time increased when using the 1.2 ohm pod due to the reduced wattage needed.

Battery status and draw indicator LED on the Trine SE

The Trine SE indicates the status of the remaining battery charge on the tri-colored LED when you draw on the Vcap pod mouthpiece. It will illuminate in one of three colors:

  • Red LED = <10% of remaining charge
  • Yellow LED = 10% – 30% of remaining charge
  • Green LED = >30% of remaining charge

These indications are pretty accurate and once the LED turns red you still have around an hour of vaping time before the Trine SE shuts down.

Once the battery is depleted of its charge, the LED will flash red 8 times. At this point the Trine SE will need to be charged to continue vaping or if you have a spare battery pack you can simply swap it out for a freshly charged battery pack.

The Trine SE also has ‘pass-through’ so you’re able to vape while it’s being charged but bear in mind this will increase the charging time.

I didn’t notice any drop-off in performance throughout the discharge cycle of the battery, even up to the point when the low voltage cut-off prompt kicked in.

How do I Fill the Innokin Vcap Pod?


How do I fill the Vcap pod

The Trine Vcap pods are a top fill design which is concealed under the duckbill style mouthpiece. The mouthpiece is a secure snap fit so does take a bit of pressure to pull the mouthpiece away from the top of the pod. It can be filled with the pod fitted in the Trine SE or removed if you prefer.

With the mouthpiece removed, the e-liquid filling port is the outer hole that’s covered with the colored silicone membrane that you pass the nozzle of your e-liquid bottle through. The center positioned hole that’s black in color is the top of the coil, DO NOT use this hole for filling.

Air hole on the Vcap pod

There is a very small hole on the opposite side of the pod to the filling hole, this is an air expansion hole to help prevent e-liquid from spilling back out of the fill port hole while it’s being filled.

Filling the Vcap pod with e-liquid

Pass the tip of your e-liquid bottle through the opening of the silicone rubber membrane and fill the Vcap pod with your e-liquid. The pod is completely clear so your e-liquid is clearly visible. Once filled, remove the e-liquid bottle tip from the filling port and re-secure the mouthpiece ensuring it snaps back into place.

Do ensure you don’t let your e-liquid level run down too low before you top up the pod. If the coil wicking ports are not covered with e-liquid, the coil will dry out and cause dry hits which will destroy the coil.

Quick Tip: If you are using a brand new pod for the first time, fill with e-liquid and leave to stand for approx. 10-15 minutes before you start to vape. This will help saturate the wick fully in e-liquid and help prolong the life of your coil/pod.

When and How do I Change the Vcap Pod?


Because the Vcap pods have non-replaceable coils, when the coil starts to degrade in the pod after a few weeks use, the pod will need to be discarded and a new pod fitted.

An indication of the pod degrading will show by either a loss of flavor or a lack of vapor. It is possible that the coil could fail completely indicating a short circuit or open circuit prompt. Either way, discard the pod and fit a new one.

Vcap pod inserted into the Trine SE
Vcap pod being inserted into the Trine SE
Vcap pod removed from the Trine SE

Pull the pod out and away from the Trine SE body pod recess. Unfortunately if you still have e-liquid in the pod, this will have to be discarded as well.

When fitting a new pod, follow the procedure for How Do I Fill The Pod, written earlier on in this review. As you insert the pod into the Trine SE body the LED will initially illuminate for 3 seconds in the color relating to the remaining battery charge.

How do I Charge the Innokin Trine SE?


When the Trine SE tri-color changing LED flashes red 8 times, it will stop working and will need to be placed on charge. The battery pack can be charged in one of two ways, either in situ with a charging cable or externally using a Trine dual battery charger (sold separately).

Charging cable plugged into the type-c charging port on the side of the Trine SE

We didn’t receive the Trine charger to test so used a USB to Type-C charging cable connected into the Type-C port on the side of the Trine SE device. The specified charging circuit of the Trine is 5V/1.0A and will take approximately 1 hour to fully charge the battery.

When first placed on charge, the rectangular color changing LED will flash red, yellow and green then flash red 3 times. The LED remains illuminated throughout the charging cycle and once the battery reaches 90% of its charge the LED will turn green. Full charge is achieved once the LED extinguishes.

For reference, we timed the length of time it took for the LED to change color and then extinguish:

  • Red LED illuminated for 44 minutes
  • Green LED illuminate for a further 27 minutes
  • Total charging time = 71 minutes

Observation: I expected the green LED to extinguish quicker than it did as it states its the last 10% of its charge. After approximately 10 minutes of turning green the battery pack was no longer warm indicating it had reached full charge but the LED remained illuminated for another 15 minutes.

The Trine SE does have “‘pass-thru” therefore you are able to charge and vape at the same time.

During the charging cycle, the body of the Trine SE gets slightly warm to the touch especially around the battery pack. This is expected, however I would recommend charging this and any other vape mod or pod on a non-flammable surface.

As with any vape device, NEVER leave it unattended whilst charging.

Innokin Trine SE Pod Kit Price


The Innokin Trine SE vape kit is new to market and currently retailing around the £13 mark although I have seen a couple of lower on-line offers so do shop around.

Spare B1000 Trine battery packs are retailing for approximately £4.00 and the Vcap pods for a single pod costing around £3.00.

What you get with the Trine SE kit

This is a great performing beginner friendly vape kit and considering it comes with 2 Vcap pods (0.6 ohm and 0.8 ohm), not forgetting the added advantage of a replaceable battery pack, it’s a great price.

Innokin Trine SE Pod Kit Verdict


Innokin Trine SE Pod Kit Review Verdict Image

Pros

  • Good build quality
  • Great design
  • Easy to use
  • LED battery display
  • 1000mAh capacity replaceable battery pack
  • Smart coil/pod detect
  • Variable airflow
  • Top fill
  • Great vapor and flavor
  • Compatible with all Vcap pods
  • Clear see-thru pods
  • Pass-through vaping

Cons

  • Not the quickest of charges

Innokin Trine SE Pod Kit Summary


4 sided view images of the Trine SE

The Innokin Trine SE pod kit is super easy to use, provides a great vape at a very cost effective price and is available in some great colors. It comes with two different resistance Vcap pods that are proven performers from the time we’ve been using them with the earlier Trine pod kit and the Endura V pod kit.

Battery pack, Trine SE and two Vcap pods in the Summary section of the review

For simplicity, ease of use, performance and cost effectiveness, the Trine SE with its replaceable battery pack is hard to beat. It’s only surpassed by the earlier Trine pod kit because of the extra control in terms of variable wattage and display.

We found the optimum set wattage across all 3 Vcap pods to be spot on and the battery life, even when using the 0.6 ohm Vcap pod proved to be very good. Variable airflow was very effective and the draw activation never faltered.

Hope you enjoyed this review on the Innokin Trine SE pod kit and found it useful and helpful.

If you have any questions or feedback, please feel free to leave us a comment below. If you do purchase one, please do drop us a comment and let us know how you’re getting on with it.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.